MTNL sterlite router setting

May i know whether some one knows about mtnl router setting for port forwarding .
I was able to open the port but the purpose of it was not full fill. So, if possible please let me know so that i would contact you personally for its solution.




Solution Given By Group Members


Re: Port forwarding on MTNL MT882

Hi MTNL Broadband user,

Try this step by step to resolve your problem.

1) login to your modem
2) go to  advance
3) click on "LAN Clients"
4) Enter your IP Address of your computer
5) Apply the settings
6) Then go to port forwarding page
7) you can see so many ports in that page.
8) If you want to forward " web server" then select servers, chose as web server and forward the port.
9) click on apply
10) go to tools menu
11) select system commands
12) click on save all to take changes permanently.

And Plz try this also

step 1: check your gateway ip
(see the network icon below on right hand side, click on that,there are 2 tabs general and support. click on support tab. and see the gateway ip, mostly it is 192.168.1.1)

step 2: open internet explorer or firefox whatever u use. And put that gateway ip in the address bar and press enter.

step 3: now it will ask for username and passwd. put your modem username and password. mostly by default it is username is admin and password also admin.

step 4: Now goto "Advanced" tab and click on it.

step 5: Now u will see options on the left side. There should be one option "Virtual Server", click on that.

step 6: Now u will be on the port forwarding page.
In private ip, u fill ur lan card ip. Your lan card ip will be same place where was your gateway ip, just above gateway ip.

step 7: in port box fill up the port number u want to forward and select the port type from the side select menu(TCP or UDP ports).

step 8: click on apply and then save and reboot.

step 9: "save and reboot" option will be in "misc" tab or in "firewall" tab, so u need to use ur mind also